Write it Safe. Prove it Safe.Safety information, evidence and controlled change
In Practice: 1

In Practice

All scenario sets →

Real Cases: 1

Real Cases

All real cases →

LinkedInWrite it Safe. Prove it Safe.

All issues

Every issue of “Write it Safe. Prove it Safe.” is published on LinkedIn and assigned to one of the three areas on this site, with a short summary. New issues appear once a month, on the third Friday at 4:30 p.m. Central European Time, starting on November 20, 2026, in English.

Subscribe on LinkedIn

All issues

  1. Issue 26 · · Prove it Safe

    Tracing AI decisions and actions in R&D and V&V

    An authorized AI workflow can produce a result without leaving enough evidence of how that result became a development decision or a verification outcome. Building on the AI TechDoc Knowledge blueprint “AI systems and the machine: levels and boundaries,” the issue asks for R&D and V&V whether the record can show who or what made a decision and triggered the next step.

  2. Issue 25 · · Keep it Safe

    Why Safety and Security must iterate — but never share a single process

    Safety and security work on the same technical system but defend against hazards that move in opposite directions, with different standards, methods and evidence. The issue argues that the two domains must exchange feedback but never merge into one process; the revised edition of October 1, 2026, adds a correction notice and an extended appendix.

  3. Issue 24 · · Prove it Safe

    From structure to meaning to evidence to using the EvoOntology AI-Model

    When a guard-door switch changes, the update has to reach the machine configuration, the affected safety function, the inspection instruction and the released evidence. Using the MX-Y7B400 example, the issue shows how canonical models, ontologies and an AI-supported EvoOntology layer lead from structure to meaning to evidence, with every proposed model change going through technical review.

  4. Issue 23 · · Keep it Safe

    AI in machinery — why 2027 is currently more important than 2028

    Discussions about AI in machinery often focus on August 2, 2028, but for machinery with AI functions the relevant shift comes earlier, on January 20, 2027, when the Machinery Regulation (EU) 2023/1230 starts to apply. With reference to the Digital Omnibus Regulation, the issue explains why AI functions in machinery follow a sector-specific conformity route and which functions require assessment from 2027.

  5. Issue 22 · · Prove it Safe

    Lifecycle documentation: The new backbone of technical communication

    Lifecycle documentation replaces the idea of a finished manual with a continuous, safety-relevant information flow from development through operation and maintenance to modernization and digital updates. The issue describes how the Machinery Regulation (EU) 2023/1230 formalizes this shift and what it means for maintenance documentation and the digital elements of machines.

  6. Issue 21 · · Write it Safe

    Safety Information Readability and Usability

    Risk management often fails where nobody transfers the safety logic into information that people can actually work with. The issue describes what makes safety information in internal technical documentation readable and usable for R&D, Safety, Regulatory and Quality, without inventing a second risk-assessment language.

  7. Issue 20 · · Write it Safe

    Material handling machines: systemic risks and recurring failure patterns

    The hazards of material handling machines arise from continuous interactions: constant motion, limited visibility, narrow spaces, unclear responsibilities and routine behavior. The issue describes evidence-based methods, such as incident and near-miss data, fault logs and observation at transfer points, that reveal recurring failure patterns traditional assessments often miss.

  8. Issue 19 · · Prove it Safe

    When safety evidence becomes a system in Machine Safety and MedTech

    Safety-critical products in machine safety and MedTech rarely lack documents; the problem starts when risk assessments, V&V results, manuals and post-market information must jointly prove that a product is still safe after a change. Drawing on research on model-based assurance evidence management and safety cases, the issue describes safety documentation as part of a managed evidence system across the lifecycle and across expectations in the EU, the United States, Canada and China.

  9. Issue 18 · · Prove it Safe

    When AI enters the Safety Evidence Chain

    AI does not have to control a machine to become safety-relevant; it only has to change the information people use to operate, maintain or approve it. The issue looks at AI-supported technical documentation as part of the evidence chain, at the governance mindset of the EU AI Act and at what documentation teams need to control, from classifying AI use to tracing sources.

  10. Issue 17 · · Keep it Safe

    From Semantic Drift to AI Drift: when signals change meaning

    Semantic drift is the moment when a signal, state or command still looks valid but no longer carries the meaning the system or the documentation assumes; AI drift extends the problem to interpretation itself. Using a robotic cell whose “ready” status changes meaning between versions, the issue applies the discipline of calibration to meaning: reference, tolerance and acceptance criteria.

  11. Issue 16 · · Prove it Safe

    Implementing control: when motion becomes a safety function

    Identifying a hazard point is only the beginning: the safety concept then has to define how control reduces the risk. Following on from issue 15, the issue traces cause and effect from hazardous movement and access situation through detection, control response and safe state to response time and the verification of the safety-related control function.

  12. Issue 15 · · Write it Safe

    Hazard points and machine motion

    Safeguarding does not start with the choice of a guard but with what moves, how it moves, where people can reach it and which energy is present. The issue explains how injury mechanisms such as entanglement, crushing, shearing or drawing-in define a hazard point and why the name of a machine says little about its risk.

  13. Issue 14 · · Keep it Safe

    API Safety and MBSE: why interfaces must become system elements

    An unsafe API rarely fails as isolated software; it fails where system context, architecture, security constraints and verification evidence no longer fit together. The issue explains how Model-Based Systems Engineering places API documentation in a wider engineering context and treats interfaces as system elements with consequences for risk, verification and lifecycle.

  14. Issue 13 · · Keep it Safe

    Where APIs hide inside modern interlinked machinery lines

    A modern food processing and packaging line is a cyber-physical system in which PLC safety logic, authenticated data flows, cloud services and external APIs interact. Using a representative line from intake to palletizing, the issue shows where APIs hide and why their documentation becomes part of the safety, security and compliance evidence.

  15. Issue 12 · · Prove it Safe

    Evidential systems focus of interlocks

    From the system side, an interlock provides evidence but does not by itself establish system truth. The issue follows the chain from safety inputs through diagnostic processing, safety functions, state and mode logic and safe states to validation and PL/SIL evidence under ISO 13849.

  16. Issue 11 · · Write it Safe

    Operational user focus of interlocks

    Operators do not experience an interlock as PLC logic but as a condition such as “Guard closed” or “Safe to start.” The issue shows how a user manual translates the safety intent of an interlock into operational meaning: what the visible condition allows or prohibits at the machine.

  17. Issue 10 · · Keep it Safe

    Why security fails: the blind spot between safety and security thinking

    Safety and security share the same formal structure but look in opposite directions, and most organizations design, audit, train and document them separately. The issue traces the resulting blind spot across ships, ports and industrial production lines and outlines how combined safety and security thinking can close it.

  18. Issue 9 · · Keep it Safe

    ISPS and industrial security: one prevention logic for ships, ports, rail, machinery, and OT

    ISPS and industrial security follow the same prevention logic: identify intentional threats, assess vulnerabilities and consequences, define proportionate controls and verify them in a PDCA cycle. Using passenger ships, container ships, ship machinery, train manufacturers and train operators, the issue distinguishes security, which asks what people can do to a system, from safety, which asks what a system can do to people.

  19. Issue 8 · · Keep it Safe

    Latency chains in IT/OT Security: why technical speed is a governance issue

    Every technical system is a chain of stages, and the slowest stage determines the behavior of the whole. The issue uses latency chains to make dependencies, control points and evidence chains in IT/OT visible and shows how ISO 27001 controls support governance under the Cyber Resilience Act.

  20. Issue 7 · · Prove it Safe

    The Documentation Latency Chain: the hidden gap between machine reality and documented reality

    Machines often change faster than the documentation around them: a component is replaced, firmware changes, a vulnerability is published. The issue introduces the term documentation latency chain for the time lag between machine reality and documented reality and shows how PLM and ILM together can close it across risk assessment, PL evidence, CRA evidence and manuals.

  21. Issue 6 · · Write it Safe

    Manuals, SOPs, and SIMOPS: why document type is a safety boundary

    Procedures often fail because the wrong kind of document was published, such as a generic guide where a behavioral standard was needed. The issue sets out what manuals, SOPs and SIMOPS rules are each responsible for and treats documentation as a management instrument for parallel work, shift handovers and contractor interventions.

  22. Issue 5 · · Write it Safe

    Lubrication data is a safety control

    Lubrication and media documentation defines operating limits, compatibility and the isolation steps that prevent hazardous releases, and is therefore part of the safety architecture. The issue looks at it from the safety, compliance and documentation side, separates manufacturer and operator duties using a linked paper-industry line and an offshore plant, and shows how media belong in the risk assessment.

  23. Issue 4 · · Keep it Safe

    Industry rules change — Information discipline doesn’t

    Automotive, food processing, pharmaceuticals, chemicals and marine each have their own rules, but they share one failure mode: information drift on the way from regulators through manufacturers and integrators to operators. The issue borrows Information Lifecycle Management from IT so that safety information stays available, trusted and owned throughout its lifecycle.

  24. Issue 3 · · Write it Safe

    ISO 12100 is everyone’s business

    ISO 12100 is the shared risk language that connects design, purchasing, operation and documentation, not a topic for the CE team alone. The issue describes how to keep working with it while it is not yet harmonized under the Machinery Regulation (EU) 2023/1230 and why the system definition belongs in chapter 1 of the operating instructions.

  25. Follow-up to issue 1 · · Prove it Safe

    CE-focused view: E‑Stop versus Power‑Off as a conformity and evidence question

    This follow-up to issue 1 is written for CE teams: the engineering is often correct, but the evidence chain from protective measures to information for safe use is not expressed clearly enough. It treats conformity evidence as one coherent safety argument across integrated lines, multiple suppliers and lifecycle changes and points to established machine safety experts in the DACH region for further orientation.

  26. Issue 2 · · Write it Safe

    Documentation and HMI: the place where concepts either stay sharp — or get blurred

    Operating instructions often leave out safety functions such as presence-sensing devices, on the assumption that operators do not interact with them. The issue explains why the purpose, coverage and limits of these devices, the difference between stop and power isolation, and the conditions for reset and restart belong in the manual and the HMI, also with a view to the Machinery Regulation (EU) 2023/1230.

  27. Issue 1 · · Write it Safe

    Writing emergency stops right: why documentation shapes E‑Stop versus Power‑Off understanding

    Emergency stop concepts in interconnected lines are often engineered with care, yet manuals, HMI texts and LOTO instructions blur Emergency Stop and Emergency Power-Off. Using hotforming lines as an example, the issue shows how stop functions, zones, energy domains and reset discipline have to be described so that people expect what the machine actually does.

Three areas, one lifecycle

  • 01

    Write it Safe

    Information for use: emergency stop, HMI, interlocks, hazard points and the readability of safety information.

    9 issues

  • 02

    Prove it Safe

    Evidence: lifecycle documentation, traceability and AI in the chain of safety evidence.

    9 issues

  • 03

    Keep it Safe

    When rules, systems and signals change: safety and security, interfaces, semantic drift and new deadlines.

    9 issues

If one of these situations sounds familiar, a short email is the first step.

Billed at an hourly rate, estimate after reviewing your documents. You work directly with Saina Veigel.

Send an email Request a callback Subscribe on LinkedIn